LF365
General Purpose Conductive Copper Ink—Thick Layers, Narrow Lines, High thixotropy
Copprint LF365 screen printable paste is formulated to provide high electrical conductivity on SI/FR4.
Technology: Screen printing
Appearance: Copper paste
Filler Type: Copper
Substrate:SI/FR4
Key Product Benefits
Drying: Hot air/Reflow oven
Sintering: Hot press
Application: Conductive Copper Ink
Common Applications: Photovoltaic cells,Printed electronics,PCB.
TYPICAL PROPERTIES OF COPPRINT NANO COPPER PASTE (UNCURED)
Particle Size, μm D50 < 1.0, D90 < 3.0
Solid Content, after 10 minutes @150ºC, 93±2%
Density, 4.5±0.2 g/ml
Viscosity @ 25°C , DVEHA Brookfield spindle 14,100rpm, mPa∙s (cps) 70000-100000
Thixotropic Index (2/20 rpm) 5.5-7.5
Coverage area @10 μm dry film thickness, 12.5 m²/kg
Shelf Life, @<-10°C, 180 days
Pot life @ 25°C, Hours 72
Drying and Sintering
Drying cycle
120sec @90ºC (Hot air, Reflow oven)
Sintering cycle
12 sec @280 °C (Laminator)
120 sec @240°C (Hot Pressing)
Conditions (time and temperature) may vary based on customers’ experience, application requirements,
drying equipment, oven loading and actual oven temperatures.
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties
Adhesion: (tape test 3M Scotch 234) pass
Cross cut test ISO 2409-2007 4-5 b
Electrical Properties: Sheet resistivity
S2S (Hot press), mΩ/□/25 µm <2.9
R2R (Laminator), mΩ/□/25 µm <2.0
DIRECTIONS FOR NANO COPPER INK USE
Copprint LF365 is supplied as a single-component formulation ready for use.
SCREEN PROPERTIES
Emulsion, Solvent resistant emulsion: 10 to 40 μm
Squeegee Shore Hardness: 70 to 90 Shore
Screen Type: Polyester screen, mesh 150 to 250
EQUIPMENT MAINTENANCE & CLEAN-UP
The equipment can be cleaned with Dowanol DB followed by water and repeated if necessary.
STORAGE
Store sealed container under -10°C in a dry location.
(Long storage above -10°C can adversely affect product properties.)
Paste removed from containers may be contaminated during use. Do not return Paste to the original container.
Copprint is not responsible for paste which has been contaminated or stored under faulty conditions.
For safe handling of Copprint Nano Ink consult the Safety Data Sheet (SDS.
For technical data please see the Technical Data Sheet (TDS)
