LF360
General purpose conductive copper ink
Copprint LF360 Copper Ink for high conductivity screen printing on PET/PC substrates.
Technology: Screen printing
Appearance: Copper paste
Filler Type: Copper
Substrate: PET/PC
Key Product Benefits
TYPICAL PROPERTIES OF COPPRINT NANO COPPER PASTE (UNCURED)
Particle Size, μm D50 < 1.0, D90 < 7.0
Solid Content, after 30 minutes @150ºC, 91.5±1.5 %
Density, 4±0.2 g/ml
Viscosity @ 250C , DVEHA Brookfield spindle 14, 100rpm, mPa∙s (cps) 13,000-17,000
Coverage area @5μm dry film thickness, 11.4 m²/kg
Shelf Life, @<-10°C, 180 days
Pot life @ 25°C, Hours 72
Sintering cycle
20 sec @ 180°C-210°C (Hot roller)
120 sec @ 160°C-200°C (Hot press)
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties
Adhesion: (tape test 3M Scotch 234) pass
Cross cut test ISO 2409-2007 3-4 b
Electrical Properties: Sheet resistivity
Hot roller @ 190ºC, 20sec ohm/sq/25 μm <0.005
Hot press @ 160ºC, 120sec ohm/sq/25 μm <0.006
DIRECTIONS FOR NANO COPPER INK USE
Copprint LF360 is supplied as a single-component formulation ready for use.
STORAGE
Store sealed container under -10°C in a dry location.
For safe handling of Copprint Nano Ink consult the Safety Data Sheet (SDS)
For technical data please see the Technical Data Sheet (TDS)
For application notes please see the LF-360 Application notes
